HOW TO CREATE A WIFI HOTSPOT FREE WITHOUT ANY ROUTER OR SOFTWARE.THERE IS SOME SIMPLE PROCEDURE TO MAKE A HOTSPOT SUCCESSFULLY USING COMMAND PROMPT(CMD).
Hi Guys Today Trickshook will show you guys this simple but important trick which is " How to create a hotspot connection" from your PC.So many people only believe that they can create a Hotspot connection only from their Android devices and not PC of which its not actually true. Once this connection is created,you can connect other device to your PC and share your internet connection with them. This trick can you some decent amount of money from buying a USB hotspot stick. Trick is working on Wins 7 and above
Note: Please make sure that there is internet connection on your PC!
Follow the below procedures and create a virtual Hotspot on your PC!
How to activate your Hotspot Using CMD:
1. Search for notepad in your PC, open it and
copy the 2 commands below
Netsh Wlan Set Hostednetwork Mode=Allow
Ssid=Wifiname Key=Wifipassword
2. Now paste the commands in the notepad and
save the file as wifi.bat on your desktop. Note
that this file is for launching your Hotspot.
3. Open another notepad and then copy the
below command and then paste in there and
save it as Stop.bat Note that this file is meant to
close the Hotspot when you are done.
4. Now double tap on the first file which is
"wifi.bat" and the file would open command
prompt window and close automatically in 2
seconds.
5. Got to control panel or right click on your
internet icon on your PC and then click on "open
network and sharing centre" and then click on
"change adapter settings".
6. Next right click on "Ethernet" and then click
on "properties" among the list of options.
7. When you click on properties, go to sharing
tab and tick on "Allow other network users to
connect...." and then ok it.
Alternative method for creating Hotspot Using CMD
1. Go For run box. Type “ncpa.cpl” and hit Enter.
2. In the network connections window, right-
click on your wireless network adapter and
select Properties.
3. In the Sharing tab of the pop-up window,
enable the “Allow other network users to connect
through this computer’s Internet connection”
box.
4. Right-click in the bottom left of your
screen to launch an administrative command
prompt.
5. The command editing window will pop
up. Type the following command like:
netsh wlan set hostednetwork mode=allow
ssid=“WIFI-Name” key=“Wifi-Password”
The ssid is the name of your network and the
key is the password. You can name them like
the above command.
6. Press enter and the Windows 7 system
will make a Wi-Fi hotspot. The last thing you
need to do is to enter the commands:
netsh wlan start hostednetwork
7.To stop just type netsh wlan stop hostednetwork
Now you will be able to see your Hotspot
connection from your smart devices and other
PCs
To stop this Hotspot connection, double click on
the second file which is "Stop.bat". Since Microsoft has removed the graphical
wizard to help setup hotspots in Windows 8 and
up, you can try the cmd like above to build your
own wireless hotspot access point on your
Windows 8, Windows 8.1 or Windows 10 PC
No comments:
Post a Comment